June 22, 2024
Description
Venice hueforged
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.32mm
The Model is 130x130mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Beige Transmission Distance: 8
PLA BambuLab Basic Orange Transmission Distance: 5
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue
At layer #10 (0.88mm) swap to Beige
At layer #15 (1.28mm) swap to Orange
At layer #16 (1.36mm) swap to Yellow
At layer #18 (1.44mm) swap to Jade White for the rest.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
michele MM3D
