Wall Mounting Clip and Pen Tray for a small Whiteboard

This is a wall mount and pen holder designed for a Staples 11x14 or a Pen+Gear 11x14 whiteboard.  It should fit others as well.

  It uses four 6x3 cylinder magnets (optional) to help hold it to the wall, and includes a pair of standoffs which help keep it from bouncing around when mounted to the wall.  The parts are glued to the whiteboard using some medium density superglue, and the wall mount is held to the wall using a large 3M Command Strip.  The Command Strip will need to be cut down a bit to fit the wall mount.

This will probably work with other whiteboards and other sizes as well.

The standoffs mount to the cardboard back of the whiteboard using superglue, and should be placed either along the sides, or at the top and bottom.  They keep the whiteboard from moving too much when using it on the wall.  The 6x3 magnets are optional but recommended, and also mount to the parts using superglue.

The 3MF includes all files, and set up to print.  The raw STLs are included, but are not oriented for printing.

If you find these models useful, please post a like or a comment with some pics of your prints. 

You can find the other things I'm working on at my blog here.  You can also follow me here on Printables or MakerWorld, to see what new stuff I post.  If you would like to support my work, you can Buy Me A Coffee using this link:

https://www.buymeacoffee.com/mystoopidstuff

Thanks for looking!