Manufacturing instructions:
- Material: PETG, PETG V0
- 3D Printer: FDM 3D printer, average print time 4h (input shaper enabled on MK4).
- Slicer settings: 0.2mm layer height, 4 perimeters, no supports
- Post processing instructions: None
- Assembly instructions:
- Use two M2 bolts to attach ESP32 to the ESP32 case
- Insert the battery to the battery case and slide the ESP32 case to the battery case.
- Connect the battery to the ESP32 and additional sensors if neded.
- Cover the battery case using the battery door
- Cover the ESP32 case using the ESP32 door
- Use two bolts/screws to attach to the wall.
License:
Creative Commons — Attribution — Noncommercial
Médecins Sans Frontières
