MacBook Pro Vertical Stand with iVanky FusionDock 1+ Stand

I wanted a laptop stand that holds my iVanky dock and my MBP 14" laptop with a case nearly vertical for clam-shell mode, but accessible when I have to actually open/touch it since the dock doesn't have a power button.

Stable enough to open to the max size that a MBP will open, but the angle would be wrong using as another screen next to externals.

Finished print dimensions:

Horizontal Dock

• 204 mm wide
• 156.75 mm deep
• 73.5 mm high

Vertical Dock

• 204 mm wide
• 168.75 mm deep
• 60.82 mm high

Included STLs for having the iVanky dock both vertical and horizontal.

Due to wanting the HDMI and network port facing the back, for the horizontal dock, I built this so the dock will be installed upside down due to its cable length to connect to the laptop ports.

Printed in 2.5 hours on my Bambu X1C with 3 walls, using a 0.6mm nozzle and 0.3mm layer height

No screws or any other hardward needed. I had neoprene strips laying around, so I put down where the dock and laptop make contact.