November 17, 2019
Description
This was a pain to make, mainly because Fusion 360 ran so slow while I was designing this one along with some other issues i ran into, but I made it through and I think it was worth it!
Anyways there are two models here. One is without the 1320 and the other is with it. I printed this in multi-color by increasing the layer height by 1mm for each color change. Just add "M600" to the gcode at the layers where you want to change colors. You can resize this logo by messing with the scale on your silcer to make it bigger our smaller as needed. Enjoy.
FYI... I lowered the height on the the thing on the Bee's helmet that looks like breathing holes (the white spots in the helmet). I lowered it because at 1mm it didn't print very well as you can see in the picture of my print.
FYI... Color order
1st Layer is Black
2nd Layer is White
3rd Layer is Yellow
Printer Brand: Prusa
Printer: i3 MK3
Rafts: No
Supports: No
Resolution: .15
Infill: 20%
Filament: Amazon & hatchbox PETG Black, White & Yellow
Notes:
Amazon Basic Black PETG
Hatchbox White PETG
Amazon Basic Yellow PETG
License:
Creative Commons — Attribution — Noncommercial
Ninova66
