First Layer Test Print - X1C P1P - Adjusted for New Flow Calibration Pattern

Basically a test print of an STL file, with a 3MF profile so this is a little easier to work with. If you have the latest flow control calibration (i.e. the latest firmware), your preview screen should look like the .PNG I shared here.

Do not scale in the Z, if you want this to be a first layer print. This has a Z height of 0.2mm, so if you are printing with a 0.2mm layer height (and 0.2mm first layer height), it should be a single layer. Obviously, you could make this into a 0.1mm single layer by scaling 50% on the Z. And you could do a 0.4mm single layer by scaling it up 200% in the Z. If my high school algebra serves me right, 150% should give you 0.3mm. Easy, right?  When you scale in Bambu Studio, it shows you the Z height, and you can probably even tell it exactly how high you want it to go, rather than fiddling with percentages.