MySondy GO or Meshtastic Case TTGO / LILYGO LoRa32 V2.1_1.6 Board & 18650 Battery

If you LIKE this model PLEASE hit  

so I get credit, this will encourage me to make more models like this, thanks!

Case for the LILYGO LoRa32 V2.1_1.6 Board and 18650 LiPo Battery. I used this is for the MySondy GO Project: https://mysondy.altervista.org/mysondygo.php

Works just as well as a Meshtastic node.

If you don't want a battery and want a more compact case, check out my other case: https://www.printables.com/model/922591-mysondy-go-case

This is the board: https://www.lilygo.cc/products/lora3

This is the battery holder: https://www.amazon.com/gp/product/B00LSG5BKO
(note: I clipped the top edges so I could keep the box smaller, clearance for the snap lid tabs)

I used 1.7x5mm screws to secure the board.

The switch is two parts. After putting the “T” part though the face, press fit the Button part over the shaft. It should fit snugly and sandwich together on the face of the box. 

I ran out of one brand of white filament before the model finished printing, thus the color inconstancy, LOL!

Added a new file with a larger switch part.