Nuka Cola Cap Bank (Fallout 4)

A special place to keep your caps! I needed something fun to put my caps in while relaxing with friends. So this cap stash was created.

I started with the wonderful model by Captain_Kiwii and expanded it up to about a foot tall. Hollowed, and sliced to fit my bobble head.

I've included multiple versions of the top section. My printer did not want to print the really large parts, so I sliced them down. This includes a sliced version of the bottle door.

There are two short pillars that go with the drinks door. N - Nub is the tiny one for the top, S - Short is the one for the bottom.

I used 1/8 inch clear sheets for the inner walls. I added a lot of possible wiggle room because I know my cutting skills have not been the best in the past. The left and right sides are about 10 3/4 x 5 7/8. The face is about 10 3/4 x 6. The sizes can very slightly based on how good or bad you cut them.

I'm currently waiting on a friend to print me a sticker for the face. I'm including an image you can print as a 6x4 'photo', lot of little cutting.

Category: Containers