June 25, 2024
Description
*DISCLAIMER* please read
This is an Add-on for the existing DK Riser by @dkarjadi
https://www.printables.com/model/584504-dk-riser-for-bambu-lab-x1p1
I've been 3D printing for just a few short weeks :D if this model interests you. because you likely want to use the Wham Cloud with this DK Riser. consider using your own slicer settings because mine are very likely ‘less than optimal.’ but any friendly advice of things that I might want to change for future use is very welcome. thank you
I'm using this second top plate for when leaving the printer alone for any extended periods of time for extra safety. The glass plate is elevated an additional 14mm. that will allow for clearance for when using a Wham Bam Cloud fire extinguisher.
Bambu Glass Cover Plate £27.99
16x (M4 x 12-14mm countersunk screws)
16x (M4 x 20mm countersunk screw)
32x (M4 x 6 x 6 Threaded Insert)
2x (M5 x 70mm cap head screw) +2x (M5 x 7 x 9 Threaded Insert)
License:
Creative Commons — Attribution — Noncommercial
7
k DEDb07
