You should go use the updated version here, instead!
Monitor pole mount for Creative Air Stage V2 - V2 by Lillprint | Download free STL model | Printables.com
This version is outdated and inefficient!
I wanted to get the my Creative Air Stage V2 soundbar off my desk, so I made this mount for my monitor mount. If you have a monitor with a USB-hub, that works perfectly with this mount.
This is designed to fit on a Multibrackets monitor mount, which has a pole diameter of 35 mm. Any other brand that has the same diameter will work, but let me know if you need a different inner diameter and I can make an adapted version or simply an adapter ring. PLA holds up fine, the soundbar is not that heavy.
You will need:
- 2x M5x20 screws to install the clamps to the pole mount. You can get away with M5x16 up to M5x25 probably
- 2x M5x16 screws to tighten the pole mount to the pole
- Four M5 nuts to mate with the screws
- Some PLA
To install:
- Attach the clamps to the pole mount
- Attach the pole mount by sliding it in from the top (do not bend it open to attach it; it will break. Sorry, you'll have to take the monitor mount off the pole, or unscrew the bottom mount from the pole)
- Push the sidebar in from the front, he clamp should open to accept it.
- The rubber feet on the soundbar sit right outside the clamps width and do not interfere, so you can keep them if you want to use it
- The input jacks on the back are not blocked by the mount
Lillprint
