• Models
  • Contests
  • Slicer
  • Login
  • Start Here
    thingiverse-iconprintables-iconcults3d-iconmakerworld-iconmyminifactory-icon

    3D GO

    3D ModelsContestsCollectionsSaved ModelsOn a mobile device?

3D GO

Privacy Policy
Qubino z-wave relay and dimmer box 3D Printer File Image 1
Qubino z-wave relay and dimmer box 3D Printer File Image 2
Qubino z-wave relay and dimmer box 3D Printer File Image 3
Qubino z-wave relay and dimmer box 3D Printer File Thumbnail 1
Qubino z-wave relay and dimmer box 3D Printer File Thumbnail 2
Qubino z-wave relay and dimmer box 3D Printer File Thumbnail 3

Qubino z-wave relay and dimmer box

Marcel Klapwijk avatarMarcel Klapwijk

June 26, 2024

printables-icon
DescriptionCommentsTags

Description

Simple switch box with 230V AC and 0-10V DC output to control a Zehnder Stork KPMe 0-10V central ventilation unit via Domoticz and z-wave.

The ventilation unit is set to variable 0-10V input and always on at level 1 via jumpers 5 and 6 and a 5-wire cable for 230V is run from the roof to the box,

All components are mounted to the frame, before the frame is placed within the switch box. The WAGO cable clamps glued into the frame using hot glue, whilst the Qubino modules are placed 'floating', only fixed on the wires.

The PSU and 230V AC output are both switched with the Qubino relay, with the PSU feeding the Qubino 0-10V dimmer the 12V input power. The Potentio meter is connected to the signal input of the dimmer, allowing for manual control.

Since the KPMe only uses about 47W at full capacity, a Qubino Flush 2 Relay could be used to switch the power to AC and the 12V PSU individually.

Note: please read the manual of the components thoroughly before connecting!

 

Materials and methods

Print list:
  • 1x kpme-box-base-frame

 

Part list:
  • 1x Zehnder Stork KPMe 0-10V
  • 1x Fibox TEMPO TA191209 187 x 122 x 90
  • 5x WAGO 221-412
  • 1x WAGO 221-413
  • 1x Vishay 249 100K potentiometer mono 1W 100kΩ
  • 1x Thomsen 429924 control knob Ø19mm x 16mm
  • 1x HN Power HNP-LED04-CV AC/DC PSU 12 V/DC 330 mA 4 W
  • 1x Qubino Flush Dimmer 0-10V
  • 1x Qubino Flush 1 Relay
  • 2x female jumper wire
  • some hot glue

 

Part links:
  • http://www.zehnder.nl/ventilatie-units/mechanische-ventilatie/dakventilatoren/kpme
  • https://www.conrad.nl/nl/fibox-tempo-ta191209-wandbehuizing-187-x-122-x-90-abs-grijs-ral-7035-1-stuks-533230.html
  • https://www.conrad.nl/nl/wago-verbindingsklem-flexibel-014-4-mm-massief-02-4-mm-aantal-polen-2-1-stuks-transparant-oranje-1188436.html
  • https://www.conrad.nl/nl/wago-verbindingsklem-flexibel-014-4-mm-massief-02-4-mm-aantal-polen-3-1-stuks-transparant-oranje-1188437.html
  • https://www.conrad.nl/nl/vishay-249-100k-precisiepotmeter-mono-1-w-100-k-1-stuks-424200.html
  • https://www.conrad.nl/nl/draaiknop-zwart-mat-o-x-h-19-mm-x-16-mm-1-stuks-429924.html
  • https://www.conrad.nl/nl/hn-power-hnp-led04-cv-acdc-printnetvoeding-12-vdc-330-ma-4-w-513734.html
  • http://qubino.com/products/flush-dimmer0-10v/
  • http://qubino.com/products/flush-1-relay/

License:

Creative Commons — Attribution — Noncommercial — Share Alike

Related Models

Thor Mjolnir Hammer Bic Pen preview image

Thor Mjolnir Hammer Bic Pen

effektz profile image

effektz

9,086

Diverse Schilder / various labels  for hobby & makers preview image

Diverse Schilder / various labels for hobby & makers

RPK profile image

RPK

2

Customizable EU License Plate Keychain preview image

Customizable EU License Plate Keychain

John_M profile image

John_M

36

Vorpal The Hexapod Walking Robot preview image

Vorpal The Hexapod Walking Robot

vorpal profile image

vorpal

4,984

MakerZ – Open Source 1/28 RC Drift Chassis by Fails & Makes | Açık Kaynak 1/28 RC Drift Şasisi preview image

MakerZ – Open Source 1/28 RC Drift Chassis by Fails & Makes | Açık Kaynak 1/28 RC Drift Şasisi

Fails&Makes profile image

Fails&Makes

Cacciavite Portachiavi - Scewdriver keychain preview image

Cacciavite Portachiavi - Scewdriver keychain

Butti Maker Studio profile image

Butti Maker Studio

22

Snap-Together Mini Minecraft Jack-O-Lantern with integrated LED preview image

Snap-Together Mini Minecraft Jack-O-Lantern with integrated LED

scottrlindsey profile image

scottrlindsey

4,449

Small Parts Storage Drawers - Organizer preview image

Small Parts Storage Drawers - Organizer

GT 3D Makers profile image

GT 3D Makers

29

8