Twink and Sprite Friends (Rainbow Brite)

This is a figure model of Twink from Rainbow Brite and can be used to make any of the Sprites or your own color choices.  This model comes in multiple pieces that use pegs and glue to fit together.  You will absolutely need to use glue for assembly.

5 files total.
Twink Body
Twink Arm Set
Twink Leg Set
Twink Star Set
Twink Peg Set (for arms)

I have included an instruction PDF that has a lot more details about suggested print settings as well as instructions on how to do multicolor printing with a single extruder printer using PrusaSlicer (feature: “color change at layer”).   And more details on assembly if you have problems. 
*I do not have an AMS and I cannot provide you with directions on how to do multicolor with that system. 

The instructions for the single extruder multicolor printing are detailed enough to guide people who have never done this before and include some troubleshooting tips for those who have tried it but have had problems. 

My general print suggestions are:  
No brim except for Peg set model.   
And you need to slow down your printer for both the Star set model and the Peg set model. 


This model is 100% my own creation and I give the following permissions:

You Can:
Sell printed models (locally or online)*
Make remixes (with attribution)

Please Don't:
Sell model files
Claim model as your own
Claim model as solely your own (if remix)

*I do not own the licensing to Rainbow Brite merchandise and am unclear on when fan art is allowed to be sold commercially.