James Webb Clock

My new A1 Mini came with a Clock Kit so I decided to try to make something for it. I wanted to try making a mirror finish on a printed part, and came up with the idea of making a James Webb clock! This print doesn't require an AMS.

To get the mirror finish, a Wham Bam PEX plate was used, but the plate was left untouched and not scuffed. Silk Gold PLA from ESUN was used for the mirrors, and to get a good bottom surface, the bottom layer flow ratio was increased. The print was paused at layer 20, and then the filament was changed.

Printer:

• A1 mini
• 0.4 mm stainless steel nozzle
• Wham Bam PEX for A1 mini
• Mirrors: Esun PLA Silk Gold
• Body: Esun PLA+ Black

Settings:

Slicer: Orca Slicer 2.1.1

Quality:

• Bottom surface flow ratio: 1.75
• Only one wall on first layer: Yes
• Avoid crossing walls: Yes

Support:

• Enable Support: Yes
• Don't Support Bridges: Yes