Cassette Wallet (print in place)

Remix of the print-in-place wallet by MakerVerse Designs together with the "Wallette" by ANOROC. Please also check out their successful original designs. 

The Cassette Wallet is put together with a print-in-place main part and added spindle plates and spindles (later glued to the main part). I wanted to adapt the model in a way, that it is still possible to only print the main part and the drawer and still have the cassette style optics visible (for those who don't like glue).

As the main part is only optically modified, the following functions still exist: 

• cash drawer, snaps in and stays in place
• can take up to  7 cards
• cards are locked with lever on the side

Notes:

• Take care for the different top and bottom spindle plates as they have slightly different thicknesses. Top is considered as the side, when the drawer is facing upwards (see picture). 
• The spindle plates were printed with a layer height of 0.1mm, all the rest with 0.2mm. Use supports for the lever on the side. 

Printed with Prusament Galaxy Black and Prusament Marble Grey.