PodPusi Negotiator for xBloom Studio Pods (unofficial)

This is an xPod variant of the Pusi Negotiator.

An unofficially designed negotiator for wave filters to be used with the xBloom Studio xPods. Thanks to EAF member @wonderllama for the dimensions of the xPods.

Brewing note: I recommend either this recipe designed by @pradyboy for Moodtrap beans, for use with this negotiator: 

Grind size: 67 @60rpm - https://share-h5.xbloom.com/?id=H0ziqjcH5%2BHAL7qcz0dpWA%3D%3D

Or my cold bloom version of Prady's recipe: https://share-h5.xbloom.com/?id=U4AIyiUZexus9wSI%2FyDHqg%3D%3D

Note on nomenclature: Pusi (푸시) is the Korean word for PUSH. Thanks to EAF member @heytchap for the name.

Printing tips:

• Use the STEP file if you can instead of the STL (more reliable for slicing, but both included for convenience).
• There are some chamfers so its best to use low layer height 0.16mm or lower for visuals, but go nuts with layer height if you don't care about looks. 
• Recommend PETG if you use hot water to rinse filters, otherwise PLA/PLA+ is fine.
• Extra walls and higher infill recommended (but not needed) to give a more solid feel to the shaft / handle.
• You may also want to print with ironing on top layer for a nicer finish.
• No supports needed, just print flat on the bottom.