July 22, 2024
Description
If you like what I'm doing, please give it a like 👍 consider joining my club or buying me a coffee! 😃👍
All parts print in the default model orientation without supports in PLA or any other material. You can print it in any layer height as well, as there are no overhangs.
There are lots of pre-made STLs you can download for different tabletop thicknesses.
This model was designed to fit LED channels with these measurements:
Feel free to adjust the parameters (see the Parameters section below) or request a different size in the comments!
You can modify this design in Fusion 360 (the free version is enough) using parameters to make it fit your needs. Download the Fusion 360 design file (in “Design Files” at the bottom of the downloads), open it, and then you can change the parameters by clicking on Solid → Modify → Change Parameters.
These are the parameters you most likely would want to change:
| Parameter Name | Default value | Description |
|---|---|---|
| silicone_pad_thickness | 1.2 mm | Adjust this to the thickness of your silicone pad. |
| table_thickness | 30 mm | Thickness of the table to clamp it on to. |
| model_channel_thickness | 3 mm | Adjust this to make the LED channel part thinner or thicker. |
| model_clamp_thickness | 3 mm | Adjust this to make the table clamp part thinner or thicker. |
| channel_thickness_tolerance | 0.1 mm | If the printed part doesn't slide over the channel easily, increase this. |
| table_thickness_tolerance | 0.2 mm | If the printed part fits too tightly on your table, increase this. |
| model_length | 30 mm | Length of the clamp. |
| model_table_extension | 50 mm | How much the clamp should extend onto the table |
| fillet_radius | 3 mm | How much the edges should be rounded off. |
License:
Creative Commons — Attribution — Share Alike
Blizzard
