June 30, 2024
Description
Needed a drop-down voltage regulator to give me a couple of amps of 12v on my 24v printer to run a 4028 fan. Mount is to add it to the DIN rail on the electronics panel on the back of the printer. It should be a light friction fit.
“6mm” version uses 2x M3x6mm SHCS to mount the board. As short as M3x4 would also work.
“12mm” version uses 2x M3x12 SHCS or anything smaller down to M3x4.
License:
Creative Commons — Public Domain
9
CVS1401
