July 1, 2024
Description
I remixed this display stand to have a more streamlined and rigid design. It is large enough to use the screen with 1 hand, no need to hold it.
I printed it in PETG to improve overall strenght, but it should also work with PLA.
No particular printing setting is needed, I just added supports. With 0,3mm layer, 3 perimeters and 25% infill you might expect just below 2 hours print and 36g of filament used.
It re-uses the 3 original screws from the bracket, you just need to ass 3x M4 nuts in the slots.
License:
Creative Commons — Attribution — Share Alike
7
dedge
