Mosquito Assassin

This is a set of clamps to mount the wand of a Flo Master two gallon pump sprayer onto an Echo CPLB-58VBT cordless blower. 

The clamps are split in half for easy mounting.  

Also included is a high-flow sprayer nozzle.

To use, slide the two halves together of the proximal (towards the user) clamp and loosely secure in position with a thumbscrew.  Position the distal (away from the user) clamp in the same way.  Snap the sprayer wand into place, straighten, and tighten the two thumbscrews.  Prepare the sprayer in the usual way with your preferred mixture, start the blower first then flip up the yellow spigot handle to begin application.  To stop, flip down the handle first to stop liquid flow then release the blower trigger.

Works great.  Saves a lot of money over professional mosquito services.

I printed the clamps in ABS.  PLA+ would probably work just as well.  Print two of the thumbscrews out of the same material as the clamps.  For the nozzle I used PLA+.