Audient Evo 4 underdesk mount

I didn't like the way the Evo4 looks if it is placed on the desk top in the intended way. Also it is hard to route the cables and to convieniently read and manipulate the controls in this orientation.

So i banned it from the top of the table and designed an angled underdesk mount. In the pictures you can see how it turned out. 
The mount is fixed with four M4 screws. I recommend an internal drive and threads that suit your table material. Don't forget to pre drill :) I used the model itself as a template to transfer the hole locations.
Because of the angle, you can't use longer xlr plugs! I think of my plug as perfectly average in length ;) Mine fits fairly tight (as you can see in the picture) and i would say it is close to the maximum. You can reference the picture with the caliper to eyeball if yours will fit. 

The one in the pictures is the first try and i made slight modifications before i uploaded the model:
- changed the orientation of the struts on the underside to improve access to the screws
- changed the position of the holes in the front, to be more concentric with the barrel plugs
I did not print one with these adjustments! But i'm confident, that they won't introduce any difficulties for you :)

If you have any comments, feel free to share your thoughts!