Corsair Link HX D5 120mm Radiator Mount

I created this mount for the HX D5 pump/reservoir because the mounting kit that comes with the kit is junk and highly interferes with air flow. This will fit the diameter of the RX120 oversized fans from corsair perfectly, and therefore will allow other 120mm fans to use this without blocking the fan blades.

The base that mounts against the fans is 5mm thick to make it easy to upsize screw length as needed. You will need M3x8mm screws (NOT THE INCLUDED THUMB SCREWS) to mount the pump to the base.

Otherwise i'll let the model and pictures speak for themselves.

Recommended Print Settings…

.4 mm nozzle

4 perimeters

4 base and top layers

%30 infill

No Supports.

Fusion 3d Models in files section so you can alter easily.