December 13, 2021
Description
Snowflake coaster fro christmas eve.
Designed to be printed in regular 0.25mm draft mode with 0.4 mm nozzle. The top solid infill of the body and the snowflake are in opposites directions so it reflects the ligth in differents ways. There is a little ring on the edge to avoid drops of liquid from cold drinks condensation.
3.2mm in total: 0.2mm first layer and then 12 0.25mm layers. The core part is 0.95mm or 4 layers, you can add a color change at this height for a great color mix.
2 Prusa mini gcode included; one of 4 of the smaller design and the other gcode is for 2 of a bigger coaster design. Both are the same height.
License:
Creative Commons — Attribution — Share Alike
9
Archipel
