July 4, 2024
Description
I designed this version of a Vortex Fidget Toy to have something other than the taper shaped ones.
Printed with 0.4 - 0.2 layer, I used support on buildplate for part 1.
Scaling up will also enlarge clearance. (base model has clearance of 0.2mm / 0.1mm per side).
In case the clearance is too tight I have added a Sphere part 1 with +0.2mm extra clearance.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Wim V
