Rook MK1 6028 Toolhead (with optional Screaming Chicken mod)

Toolhead

This Rookery-compliant toolhead for the Rook MK1 3D Printer will house a 60mm x 28mm part cooling blower fan and a 30mm x 10mm hotend axial fan.

It is designed for use with a CHC CR10 Hotend, but other hotends may work as well.    

There are spaces for two M3 heat inserts on the side of the hotend for mounting an ADXL sensor for calibrating vibration compensation.

Print this toolhead using Polycarbonate or ASA.   I would suggest printing with the front of the toolhead on the build plate to limit the amount of support material needed.
 

Screaming Chicken Mod

Optionally, have a little fun and give your hotend the appearance of a Screaming Rubber Chicken.   I printed the additional pieces with my resin printer and attached them to the hotend with CA glue (superglue).

---

This was designed in Fusion 360. I have included the STEP and Fusion 360 formats of the model in case you would like to make alterations for own usage.

NOTICE: If you post remixes online --- Thingiverse, Printables, Cults, etc. -- you must include attribution and link back to this original design. Do not claim the original design as your own.