1/10 Scale Miniature Aerogarden Harvest (With Removable Water Bowl)

A very small Aerogarden with a removable water bowl and grow deck.

STEP and f3d files are included if you wanted to modify it

Can be printed with both Resin and Plastic.

See print settings and post printing for instructions.

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

Doesn't Matter

Supports:

Resolution:

0.12mm, 0.36mm extrusion width

Infill:

Filament:
Various PLA Carbon Fiber/Generic White/Glow in the dark

Notes:

All of the other parts do not need support.

Orientations for all of the parts can be found in the pictures.

Tolerances for most parts are around 0.1mm

Post-Printing

You will need:

• Superglue
• Something to make the plants with (Ex: Construction Paper)
• Optional: Hot glue
  1. Superglue "AG_Leds" to the indent in "AG_Top"
  2. Superglue the the result to the top of "AG_Base". Make sure to align them well. This step can be a bit finicky.
  3. make and insert plants into the holes in "AG_Deck".
     3a. Optional: Hot glue the bottom of the plants so they stay in place.
  4. Insert "AG_Deck" into "AG_Water_Bowl". Make sure that the trapazoid indent is facing up.
  5. Insert the result into "AG_Base".

Category: Model Furniture