Description: Tired of oil spills when using your Makita DVP180 vacuum pump? Struggling to find a proper sealing ring? Here's a custom solution just for you. This mold allows you to create a better sealing ring for the oil container, ensuring a tight fit and preventing those annoying leaks.
Features:
- Purpose: Designed specifically for creating a custom o-ring for the Makita DVP180 (Fig. A,1).
- Design: The mold consists of four interlocking parts (Fig. C,4), securely held together by an M6 bolt (Fig. C,5).
- Improved Fit: The o-ring produced is slightly smaller for a snug fit on the oil cap, enhancing the seal (Fig. A,2).
- Usage: Simply use a medical syringe (Fig. C) with approximately 3ml of liquid rubber. Ensure to degas the liquid before injecting it into the mold for best results.
Instructions:
- Assemble the four parts of the mold using the M6 bolt to hold them together securely.
- Degas the liquid rubber thoroughly to remove any air bubbles.
- Using a medical syringe, inject about 3ml of the degassed liquid rubber into the mold.
- Allow the rubber to cure completely before removing the newly formed o-ring from the mold.
- Fit the new o-ring onto the oil cap of your Makita DVP180 and enjoy a spill-free operation.
Say goodbye to messy oil spills and hello to a perfectly sealed oil container with this custom o-ring mold. Download and print now to upgrade your Makita DVP180 vacuum pump!
JK
