July 5, 2024
Description
Needs 4x M3x10 (or longer) socket head cap screws and 1x M5x16 (or longer) hex head screw and M5 hex nut.
The little gear on the side is clamped down with the M5 screw, which locks the jaws solidly in place.
The jaws are a bit hard for soft leather-hard clay for trimming. It does work but it can leave marks. I used it mostly for applying wax or glaze on already bisque-fired pieces.
I got rid of this Vevor wheel I made this for, so I never refined it any further. It's not very elegant, but it works.
License:
Creative Commons — Attribution
9
Ramonin3d
