Wall mount for Synology DiskStation, DS223

These brackets can be used with any of the Synology DiskStation 2 bay Plus, Value, or J series NAS: DS218, DS223j, DS223, DS224+, etc.

Space the brackets 140mm apart and the flange will trap the Synology's feet preventing it from sliding out of the brackets.  The “F” model, with narrow flange, is mounted at the front of the NAS. The “R” model, with wider flange, is mounted at the rear of the NAS.  This design does not restrict any of the airflow vents on the bottom or side of the NAS.

I printed these out of Elegoo PLA+ Space Gray with 3 walls, 20% gyroid infill and 4 top and bottom layers at 0.24mm layer height. No supports are required.