July 6, 2024
Description
Warning
This upgrade was designated 18 months ago and assembled over 16 months ago. I had never shared it because it is tricky and the result of printing a part is not perfect as expected, but once everything is assembled no default are visible.
I'm finally sharing it (and it will be the last upgrade for the mAx-Team) because it was asked to me this week.
Sorry, I'll let you see the sizes of the screws because I've since forgotten its a little.
Definition
No.
Printing
Is required the same printer size than 3D SETS has defined.
Use the same setting than 3D SETS.
For the small antenna, you need to print twice the left and right antenna parts
Build
Supports should be removed for the Roof1.
The build required extra screws to assemble the modified Roof1 and the Roof1 led blocker; I think it M2x6.
Like on 3D SETS build guide, don't forget to drill 2 2mm holes on the Roof1 to screw the sun blade.
Use glue to assembly the right and left antenna parts
For the 1.75mm antenna use a piexe of 1.75mm filament and slide it into the antenna support
Feedback
It is welcome.
Remark
None.
Version
v1/v20240706 1st upload.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
9
mbe075
