Samsung Freestyle Gen 2 1/4" tripod stand

Print in place stand for Samsung projector. Using with ¼" or m6 screw. You can mount it on standard tripods or hook on the wall (see photos);

There is 2 versions. One with single object and second with two pieces and bigger grip.

Recommender V2 version with this settings:
- at least 15% infill
- 3 top / 2 bottom layers - base
- 2 layers - cover (it should be elastic)

Model has no tolerance, sand paper or good calibration required ;)

⚠ After mounting be sure that no part is losing, and projector is tight sitting between grip and cover