Bambu Lab X1 Exhaust Vent Adapter - 2.5 Inch 65mm Hose Duct

Designed for magnets: 10mm diameter x 2.65mm thick.

There are two small holes that register to holes in the back of the cabinet. Add very small screws or posts to help register the exhaust vent if you wish.

The hose exits down so you can keep the unit close to the wall. 

To minimize the support structure needed I modeled this in 3 parts. The parts overlap and register to each other. They will need to be glued together (cyanoacrylate glue suggested).

I plan on using an 80mm fan with variable speed at the window exhaust to help pull fumes out. I have not designed that portion yet, but I wanted to offer up this cabinet vent to others for their purposes.

You'll need hose clamps.

I ordered 2-1/2 x 10' Flex PVC Hose to use.