CNC Hold Down

Simple hold down clamps for CNCs.

Changes compared to original design:

• Scaled down to fit M6 hardware
• Reduced the height of the slot area to fit shorter screws and not portrude as far (to avoid collision with the toolhead)
• Enlarged the clamping height to fit workpieces from 15mm height (most of my workpieces are 15-24mm thick)
• Added some fancy shmancy angles and fillets to make my changes look neater (and also to be vastly more aerodynamic)

Original Onshape document can be found here: Hold Down Clamp

The STEP file as exported by Onshape can for some reason not be correctly read by the current PrusaSlicer, so I uploaded an STL file instead. Just ask me if you want the STEP file anyway and don't want to create an Onshape account to export it yourself for it.