Philips Hue Hub - Under desk bracket

Purpose:

As the title says, with this holder you can mount a Philips Hue Hub under a desk or similar.

The bottom is open and allows cable connection. The front allows to push the button and the view to the signal lights.

I printed it upside down without support. Depending on your printer, you may need support under the mid section of the circle in the center.

Used screws: 2x Torx/SPAX 3,5x25mm

Update from 2021-12-21:

I've added an additional version with flanges at the sides instead of the back, and for each version a variant with a shorter flange for shorter screws.

Used print parameter:

Material: PLA

Resolution: 0,2mm

Infill: 25%

Brim: no

Support: no