Secure Wrenches Organizers

I made these years ago inspired by other wrench organizers that I saw, but I wanted to be able to carry the wrenches without concern for them falling out or the retention strap coming loose.

Added extended clips to accommodate wrenches 8 mm wider if needed.

Slicer Settings (Cura)

Large and Small Wrench Trays: 

• Material - PETG is best if used in a hot toolbox sitting in a garage.  I used HTPLA.
• Orientation - open section facing away from bed
• Layer height - 0.20
• Wall line count - 2
• Top layers - 4
• Bottom layers - 4 
• Infill density - 20%
• Infill pattern - Cubic Subdivision
• Support - None

Large and Small Clips: 

• Material - PETG was used for flexibility as PLA may snap
• Orientation - Sitting on its side
• Layer height - 0.28
• Wall line count - 2
• Top layers - 2
• Bottom layers - 2
• Infill density - 15%
• Infill pattern - Lines (flexibility)
• Support - None