stand for the openrc truggy

I had put this together as a small side project and was looking for something to put it on so that I could screw to it easily.

This stand is the result.

It can be printed in PLA or PETG.
I printed the infill with at least 50%
The posts can simply be printed upright without support.
The side parts and the two centre struts have to be printed with support and upright on the long side. 
Otherwise I always had problems.

When assembling, you may have to slightly rework the dovetails. Otherwise it can be a little more difficult to put together.
Otherwise, the stand should be easy to dismantle at any time.
Everything is designed so that nothing needs to be glued.

Anyone who would like to support me is very welcome to buy me a coffee

 https://buymeacoffee.com/roggason