Set of dowels for Rocco's Vault with Pin Tumbler Lock

A total of 21 dowels with different lengths are required for the assembly of Rocco's vault.
Quite expensive if you use metal dowels. Therefore, I have designed all the dowels exactly according to the given measurements. In my opinion, they work just as well as the expensive metal dowels.

And one more tip: You don’t need to buy the metal springs either. I simply used a spring from an old ballpoint pen and cut it into three equal parts.

Printing information

The STL file is correctly aligned.

First Layer: 0.20
Layer height: 0.10
Perimeter: 3
Infill: 100% 
Support: none

I am looking forward to your Makes! :-)

If you like this design, feel free to check out my others here.