Paint Handle for mini's / miniature painting holder

There are some amazing designs out there, which I've used and enjoyed but wanted to have a crack at designing my own.

I may do some variations and also upload but we'll see how it goes and any feedback would be appreciated.

The mini mounts via BluTac or some variation and the it is able to spin on the handle. A bearing is installed for easy rotation. A bit over kill but why not!

Parts required;

• 2x M3 bolts
• 1x M4 bolt
• 1x M4 nut
• 1x M4 washer - put between printed parts and tightened to preference
• 1x bearing 4x13x5mm (624ZZ is what I had to hand)

I print most parts with a 0.4 nozzle, except the body and support, which I printed in a 0.6 nozzle with a layer height of 0.4. For this reason, I've added a ‘snug’ model for the support, which may print better with a 0.4 nozzle. YMMV depending on printer.

The images show a model printed with PETG. Apologies the parts look a little rough, I've recently had to change the extruder and the printer requires a little tuning now.

Hope this helps, enjoy and please do leave makes. Thanks