Universal parametric Spoon

I needed a solid spoon for my laundry detergent, that could plunge into the powder from above. Can be used for other purposes of course, like coffee, sugar, etc.
I attached a Fusion 360 parametric file, so you could scale it to your needed size. The handle thread has a clearance of 0.2mm, which was perfect for me. Print the parts in the direction like you can see on the printbed picture I attached. The models were designed to be printed without need for any support at all, as the handle is intentionally chamfered for bed adhesion at the end.

Fusion 360 parameters to tune the scoop size

• depth
• height
• width
• radius

Printing Parameters

• 0.2mm layer height should work with the thread, I used variable layer height
• 5 wall loops / outer perimeters give good stability
• no support needed with PLA