Anko Tablet Holder Arm Extension

Anko Car Tablet Holder Extension Arm

The original tablet holder is really only good for the child directly behind that seat, I created this arm so that both kids could watch at the same time. The only additional component you'll need is an m3 screw and nut or a cable tie if you're feeling lazy. Due to road vibrations i didn't bother with 3D printing a screw and nut, didn't think it'd last very long.

Print Settings:

Layer Height @ 0.3mm (you can do less but honesly it still looks good at this thickness)

Infill @ 50% Rectilinear (again you could do less but it isn't much difference in spool use)

Make Info

Printer: Elegoo Neptune 4 Pro

Used Filament: 38.26 grams, 12.83 meters

Print Time: 51 minutes