Big dog bowl rack

I based my model on the “dog bowl rack” by @RAJ3D and made it for big bowl and made it higher for my big dog. My bowl is from Jumbo and it has 228 mm diameter. 

This was printed on Prusa XL 5TH and I made use of all available build plate as you can see in the pictures ;)

I printed it in 2 color PETG, without any support and TPU feet. It's very sturdy ( may be overkill :) ) even with the doggo pushing on it while eating.

Since this was printed without any support I made an small top cover where the overhangs were so it can look really nice and finished
 

Thank you @RAJ3D for your inspiration