Aspys Barefoot Shoes

Shoes sizes: EU
 

Filament: Recreus 82A, 3Dfils 85A

Use TPU 95A first (Overture), don't use "high speed", "high flow" (too stiff, uncomfortable)
 

I suggest using my universal print files (gcodes) instead of slicing the 3d models. Find the gcodes in “Aspys print files.zip” folder

Upload the gcodes on an SD card and insert it in the printer. Launch the gcode from the printer interface, ignore warnings and proceed. Adjust temperature and fan speed once the print starts to fit your filament needs

Printer requirements for the gcodes: 0.6mm nozzle, 250 x 250 x 300 buildplate fits every size, 256 x 256 x 256 fits size 41, 250 x 250 x 250mm fits size 40

Depending on the size, each pair of shoes takes 9 to 12 hours, weights 120 to 160 grams

 

Website: https://www.riverfamily.art/

Contact: [email protected]

 

Cura Slicer Settings (download “Aspys print files.zip” and see Aspys_Cura_Project.3mf):

- layer height: 0.36mm
- infill line width: 0.65 (or 0.4 with 162% infill flow)
- wall line count: 0
- top layers: 0
- bottom layers: 0
- initial bottom layers: 0
- infill line distance: 3mm
- infill pattern: grid
- connect infill lines: yes
- infill line direction: []
- randomize infill start: yes
- infill overlap: 0mm
- infill speed: 18mm/s
- combing mode: off
- z hop: 1.2mm

settings modifier (200x200x2.4mm solid, placed at Z = 0)

- infill flow: 300% (1.2 mm line width)
- infill speed: 9mm/s

How to design and slice: https://www.youtube.com/watch?v=6ae-rzo_zJM

BambuStudio settings (download “Aspys print files.zip” and see "Aspys_BambuStudio_Project.3mf")

Shoe:
- layer height: 0.36mm
- line width sparse infill: 0.9mm
- wall loops: 0
- top shell layers: 0
- bottom shell layers: 0
- sparse infill density: 43%
- Infill pattern: Grid
- Infill anchor: 1000 (unlimited)
- Max infill anchor: 1000 (unlimited)
- Infill direction: 45°
- Detect narrow internal solid infill: no
- Speed sparse infill: 18 mm/s
- Enable support: no
- Reduce infill retraction: no

Cube modifier  (256x256x2.4mm at Z=0):

- Infill density: 60%
- Infill line width: 1.2mm

Filament:

- Retraction: 2.4mm
- Wipe: no
- Z hop: 1.2mm, Normal type
- Max volumetric speed: 4.8 mm^3/s 
 

LICENSE: Public Domain

https://creativecommons.org/share-your-work/public-domain/cc0/

Also applies to pictures, videos and names