Nitehawk 36 ldo BMG Extruder IDGA / Clone Mount

Hey Team,

I've picked up the Nitehawk 36 LDO and am figuring out how to mount it to my printer. The most suitable location I found is on the BNG extruder. This setup is designed to mount to the original bolt using a 40mm M3 bolt.

To attach the Nitehawk, you have two options:

1. Screw in two M3 10mm bolts.
2. Use a heat insert from the back with M2 bolts and secure it with M2 10mm bolts and a washer.

I recommend being cautious with the contact on top—consider using a little electrical tape for added safety, although I didn’t need it personally. See photo. 

Please note, print at your own risk.

Printed in PLA and/or in PETG 

Nozzle 0.4

Layer height 0.2

Wall Loops 3

Infill %40 

Top and bottom 3