D-Link COVR-1100 Wifi Access point mount

I created this simple mount for the D-link COVR-1100 series Wifi Mesh system. You can use it with two screws and wallplug's to mount it directly to the wall, or you can use two electric pipe clips and bold's and nuts to click the mount to an existing electric pipe like I did in the picture.

The access point snaps firmly into the mount so no worries when it get's pushed or hit, It will not come of unless you want it to.

This is one of my earlier designs that I made when I was still using 123D Design.

Print Settings

Printer Brand:

Creality

Printer: 

Ender 3

**Rafts:**

No

Supports: 

No

**Resolution:**

0.2

Infill: 

30%

**Filament:** 123-3D.nl PLA Blue 
 

Notes: 

At this time I print everything in PETG but this one is made a while ago when I still printed mainly in PLA. Both should be fine since the mount will not be exposed to high temperatures or direct sunlight.

Post-Printing =============

No Post Processing needed.

Category: Computer