HDzero Nano v3 Cam holder Fractal 75 pro

Could not find a good cam holder for the HDzero nano V3 cam on a fractal frame.

The original did not fit nicely because the cam is 16 mm high and i did not like the way the mipi cable sat on front of the carbon.

So i made something new with tinkercad, i used parts of the original strap and made a little insert with strap.    

See pictures!   first insert strap from below then flip the insert higher so it sits nicely up front.    Insert cam with mipi cable and make sure it is al the way down.  (mipi cable also half way in so it cannot get out) and then use the original part over then lens and over the top to secure it.