Magnetic Cable Guide for Prusa MMU Cable (EMMS) 10mm

I made a nice little cable guide for the extended MMU cable that attaches magnetically to the Prusa Enclosure's top. It uses adhesive magnets with 10x30x1mm like these from Amazon. It lets the cable stay where it is meant to be.

This cable Guide is meant to sit on top oft the original Prusa enclosure when the MMU is mounted on top of the enclosure.

This guide is part of the External MMU Mount System (EMMS) for Original Prusa Enclosure and Ultimulti MMU.

To make this part elastic enough and to avoid breaking it into parts when inserting the cable you have to print it in an upright position with the ring on the printed. 

PETG Filament is recommended.

Please show me your results and send me fotos of your makes. I like to see how you use this model. If you have ideas for improvement don’t hesitate to send them to me in the comments.   I will try to incorporate your suggestions and will modify the model for special needs if you ask me to do so. 

And of course a like ♥ or a rating ⭐ of the design are always welcome. 

happy printing, clamikra