Bicycle chain guard for 36 teeth front gear

The chain guard is for a 36 teeth front gear with 5 M4 holes and roughly 150mm diameter.

Additionally you need 5x M5x15 screws and 5 M5 lock nuts + washers.

Print Instructions

• variable layer height
• PETg is preferred (or stronger material)
• supports:
  I uses 0.35 layer height wit a 0.6 nozzle and needed no supports, but depending on your printer/settings you will need a bit support. 
  Experimenting with the slicer shows 0.6 nozzle with 0.20 layer height will work surely with no supports. 

Additional notes

I'm interested in your feedback to improve my stuff! So give me likes, post makes, comment and rate the print to show others and me how well it goes.
If you post a make, let me know which filament you use.

If you want to support me by donating a coffee go to https://ko-fi.com/antimaterie I would really happy about it. The money will be invested in all stuff regarding 3d printing to give more and better quality models.

In general my Prints are not for commercial use, but if you are a print farm owner and want to sell some of my stuff, please contact me.

Hope you enjoy my models.