Adapter for Garmin 1050 bike computer

The Garmin 1050 is larger than previous models and does not fit the standard computer mounts.

This adapter moves the bike computer 10mm forwards and 6mm upwards. Allowing it to be mounted to standard computer mounts.

I printed mine in carbon fiber reinforced nylon and used heat set inserts to mount the Garmin tray. You can print in a different material and if you don't have heat set inserts there is an included version with regular m3 hex nuts that just drop in.

Some computer mounts are slightly sunk down, so you need to print a spacer plate to raise the mount up.

The mount in the photos have a 2mm spacer plate to fit the ENVE out front computer mount.

Vitamins needed:

2x M3x8 FHCS

2x M3x10 FHCS (or longer if you an additional spacer plate)

2x M3x5x4 threaded heat set inserts (OR 2x M3 hex nuts if you choose the hex nut version)