Acar X5 power strip magnetic mount

Designed to slot into a matching recess on the bottom side of the Acar X5 power strip - but I guess you could also glue it to something else if you wanted.

Part needs to be printed 2 times to hold the power strip from both sides. 

There are 2 versions provided: one using a single 20x5 magnet, the other using four 10x5. Both have the same height so can be used interchangably.

What I found during testing is that press-fit can be enough to hold the magnets in place for some time but they will come loose after slightly heavier usage - so I recommend adding some glue to keep them in place.