NR200 Side panel 15mm extension (SEMI-OPEN AIR DESIGN)

This is a work in progress for the NR200- adding a side panel extension that's 3D printable to allow for taller CPU coolers like the NH-D15. Currently my designed clips hold the side panel 15mm out from the side (extending the 153-155mm cpu cooler height limit out to 168-170mm, which should allow for the NH-D15), with a gap between the case and the panel. Future work would involve me designing some parts that close this gap, but this is a pain to get right. Not sure if people were interested in me continuing this work to close the case.

Looks pretty good with the NR200P tempered glass side panel as well!!

PRINT THE PARTS ORIENTED FLAT- the "side-panel-extension-snapfit" should be printed horizontally, and "sidepanel-bottom lock" should be printed with the S side facing up. The snap-fit clips should be printed horizontally for the proper strength in the horizontal direction. They'll break easily if not printed properly.