Spray Paint Gun

This spray gun is very easy to assemble only requiring any type of glue, rubber band (Small), And a m4 screw, nut and washer. Follow the added pictures as a guide and below all of this there is instructions , This is meant to be a more permanent tool than some others as a one time use. This is pictured to be used again and again not having to reprint it.

-instructions 

When printing the nozzle I printed it on its back like where the mouth so call it is sticking up and the roof is laying on the bed so u don't need supports also Change the orientation of the trigger so it's laying flat. I also printed the trigger with 75% infill but feel free to try other infill density amounts

When gluing the two half's together make sure to glue the top and bottom and have every thing flat and flush (not like mine I rushed)

When lining up the nozzle look at the part of the the bottom of the part where the machine flatend it out and started the ark, look at the picture it should help, line the seem of the gun up to the middle of the part and glue it